NetBorder VoIP Gateways

The Most Flexible Carrier-Grade High Density VoIP Gateway

Although the telecommunications industry is rapidly adopting the Internet Protocol to provide Voice-over-IP (VoIP) services, the legacy PSTN network (using T1/E1 telco lines) is still prevalent for world-wide communication. As such there is a growing need for equipment that can seamlessly...

The Most Flexible Carrier-Grade High Density VoIP Gateway

Although the telecommunications industry is rapidly adopting the Internet Protocol to provide Voice-over-IP (VoIP) services, the legacy PSTN network (using T1/E1 telco lines) is still prevalent for world-wide communication. As such there is a growing need for equipment that can seamlessly bridge legacy PSTN and VoIP services, whilst offering a variety of protocol support.

The Sangoma VoIP Media Gateway is the answer to this challenge offering seamless interconnection of next generation VoIP and the legacy PSTN networks, scalable up to 32 T1/E1 lines (or 960 simultaneous calls) in a 1 U form factor. Supporting concurrent use of ISDN, CAS (R2), SIP, T.38 fax Sangoma’s on-premise VoIP Gateway appliances are perfect for service providers migrating from legacy services to IP-centric architectures and large enterprises & call centers to deliver high-volume SIP trunking. Integrated transcoding capabilities also guarantees NVG to interop with any open source or propriety PBX solution and increase ROI by compression VoIP traffic.

Advanced Web GUI

Browser-based GUI use for configuration, control and monitoring of PRI links and network connections and load. Easy to use dialplan routing for basic and advanced call routing configurations. System logs and reports are also available directly from the GUI.


Diagnostic Tools

Browser based dashboard featuring time based graphing, system and session error reporting and email notifications upon faults. Onboard PCAP training tool capturing signaling and media, eliminating the need for extra port mirrors or hubs. The Hardware Crash protection feature reboots the system on lockup or hardware fault.


Scalable and Flexible


NVG is future proof with field upgradable licensing for up to 32 T1/E1s or 960 simultaneous calls in a 1 U platform and flexible with routing between any PRI, CAS (R2) and SIP interconnection using its advanced XML routing engine.


Simplified Licensing

All NSG appliances are field upgradable and licensing is per channel, which means all the features are always included – No sticker shock. Predictable NSG capacity and cost in every use case.


Proven Interoperability with Global installations

NVG has been deployed globally, which can attest to its highly successful interoperability and integration with PRI and VoIP carriers. On-board transcoding capabilities ensure interoperability with any open-source or proprietary PBX. So you never have to worry about new deployments wherever they may be.


Enhanced Media Capability

NVG has extensive support for various wireline, mobile and audio codecs which guarantees interoperability with service providers, enriched audio quality and improved ROI. NVG comes with support for AMR, AMR-WB (G.722), GSM, G729AB, G.723, G.726 and iLBC, all configurable on a per channel basis. Extensive support for T.38 protocol which is used for Fax-Over-IP comes standard.

Use Cases


SIP Network to ORI Interconnect

Provide High value VoIP services to your customers.

High-Density Call Completion Platform

Provide competitive long distance and large scale call completion applications using cost-effective.

Migrate Legacy Infrastructure to VoIP Services

For large Enterprises, Carriers and Call Centers using legacy PRI/MFCR2 equipment, reduce telephony costs by seamlessly connecting an NVG appliance to access VoIP based services.

PSTN Trunking for Large Call Center

Connect your Large IP-PBX Based call centers to your trusted PRI/MFCR2 TDM trunks.

NetBorder Gateway Features

Echo Cancellation

DTMF detection and generation:
RFC2833 tone relay
In-band
SIP info
G.168-2002 with 128ms tail

VoIP Protocols

SIP V2 / RFC3261
SCTP RFC 2960

PSTN Protocols

Primary Rate ISDN (PRI)
E1: Euro-ISDN, CAS MFCF2
T1: Q.931, NI2, 4ESS, 5ESS, DSM-100

Call Routing

Configurable and extendable XML-based dial plan and routing rules

Capacities

Flexible 8 port appliance
8 E1/T1 ports, or 240 channels
16 port appliance
16 E1/T1 ports, or 480 channels
32 port appliance
32 E1/T1 ports, or 960 channels

Debugging

Dedicated Browser interface for capturing full RTP media and signaling information
Onboard browser-based PCAP tracing, signalling and media – wireshark compatible
Large onboard storage capacity for long term tracing

Audio Codecs

G.711
G.723.1
G.726
iLBC
G.729AB
GSM
G.722
AMR
G.722.1
Fax Support; T.38 Fax Relay

Management & Configuration

Web GUI
Command line interface
Detailed logs with con gurable le size and autorotation
SNMP
Radius
Call detail records in XML format
Remote firmware upgrade

NetBorder Gateway Specifications

Interfaces

PSTN Interfaces

8 port appliance
8 E1/T1; One 8-port telephony interface (RJ45 ports)
16 port appliance
16 E1/T1; Either two 8-port telephony interface (RJ45
ports) or one 16-port telephony interface (16-port interface requires 68-pin SCSI type interface)
32 port appliance
32 E1/T1: Two 16-port telephony interfaces (16-port interface requires 68-pin SCSI type interface)

Network Interface

8 port appliance
5x LAN 10/100/1000 BaseT Ethernet ports
IPV4, IPV6
1x IPMI remote management Interface
2x USB ports
1x console port
16/32 port appliance
7x LAN 10/100/1000 BaseT Ethernet ports
IPV4, IPV6
1x IPMI remote management Interface
2x USB ports
1x console port

Hardware

8 Port Appliance

1U: 430mm (W) x 305mm (D) x 45mm (H)
7.2kgs (16lbs)
60W universal AC power

16 Port Appliance

1U: 430mm (W) x 470mm (D) x 45mm (H)
15kgs (33lbs)
250W universal AC power

32 Port Appliance

1U: 430mm (W) x 470mm (D) x 45mm (H)
15kgs (33lbs)
250W universal AC power

More

NetBorder VoIP Gateways There are 2 products.

Showing 1 - 2 of 2 items
Showing 1 - 2 of 2 items